The latest in TV design deserves the latest in bracket
This is the new 2012 model full motion bracket
that works for just about every flat panel on the market today.
Included in the box now along with your backet and all
your mounting bolts you will also find a FREE 2 Metre HDMI cable! Thats
right at no extra cost you also get the cable you need to connect all of today's
mount tilts, swivels and extends allowing for the most comfortable and enjoyable
television watching experience.
In the box you get:
- 40" - 65" LCD / LED / Full motion LED/ LCD
- Mounting hardware (screws etc)
- Free 2 meter HDMI cable
- Low Profile "Slimline" Design: 32mm from wall
- Vertical tilt: 12 degrees
- Swivel -45degrees to +45degrees
- Distance from
wall: 32mm to 642mm
- Weight capacity: 25kg
- Compliant to VESA standard
- 5 Year warranty
- Maximum mounting hole spacing (horizontal):
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA
standards up to 600x400mm
Will this bracket fit my TV?
The short answer is YES.
The long answer is you need to check your mounting
holes measurements on the back of the TV.
Check the back of your TV and find the four threaded
holes (if there is no threaded holes or less then four holes, then the TV is not
classified as wall-mountable)
Then measure the horizontal and vertical distances
between them (in mm) - the bracket will fit screens with mounting holes a
maximum of 600mm wide and 400mm high (centre to centre of the hole)
Now measure your screen - the bracket is 620mm wide
and the arm height is 400 mm so make sure the outside of the screen is wider and
taller than that and under 25kg. (which it is as they dont seem to make TV's
heavier than this!)